So you think you might have a clutch problem with your vehicle ?nw105burien-clutch-repair

Well you,ve come to the right place. Dans joined Turbo PACS and has had 4 years of full time experience at Mr Clutch, fitting all types of Clutches and Gearboxes and he is ready to get your car back on the road.

Clutch Diagnostic Test

If you don’t hear any noise during these four steps, then your problem is probably not the clutch. If you hear the noise at idle and it goes away when the clutch is pressed, it may be an issue in the contact point between the fork and pivot ball…call Turbopacs on 0191-3863422 nw105dan1

  1. Start your car, set the parking brake, and put the car in neutral.
  2. With your car idling, listen for a growling noise without pushing the clutch in. If you hear something, it’s most likely a problem with the transmission. If you don’t hear a noise, proceed to step three.
  3. With the car still in neutral, begin to push the clutch and listen for noise. If you hear a chirping noise as you press, it’s most likely the clutch release, or throw-out bearing. If you don’t hear a noise, proceed to step four.
  4. Push the clutch all the way to the floor. If you hear a squealing noise, it’s probably the pilot bearing or bushing.

Now that you have completed this simple test it makes sense to have a more detailed assesment completed and thats where we come in.nw105turbopacs_card_payments

STAY CONNECTED WITH US:  

Privacy Policy Settings